Applicable Standard

EMC Directive Compliance, FDA Standard

Measurement Center Distance

100mm 3.937 in

Measuring Range

±35mm 1.328 in

Repeatability

70 μm 2.756 mil

Linearity

±0.1%F.S.

Temperature Characteristics

0.03% F.S. /℃

Light Source

Red semiconductor laser Class 2 (JIS / IEC / GB) / Class II (FDA)(Note)
Max. output: 1mW
emission peak wavelength: 655nm 0.026 mil
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).

Beam Diameter

ø120 μm 4.7241 mil approx.
(Note) This is the size in the measurement center distance. These values were defined by using 1 / e² (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value.

Supply Voltage

12 to 24V DCplus or minus 10% Ripple P-P 10%