Details

---

project	content
Ordering product number	EX-C212B
model	EX-C212B
Detection distance	2m
Detecting objects	Opaque objects larger than φ4.5mm
Supply voltage	12V~24V DC±10% / ripple P-P10% or less
Current consumption	Emitter: 20mA or less Receiver: 12mA or less
Output	NPN open collector transistor • Maximum inflow current: 100mA • Applied voltage: 30V DC or less (between output and 0V) • Residual voltage: 2V or less (when inflow current is 100mA) 1V or less (when inflow current is 16mA)
Output: Output work	ON when no light is received
Output: short circuit protection	Equipped (auto recovery)
Reaction time	Less than 1ms
Working status indicator	Orange LED (lights up when output is ON) Receiver equipped
Stability indicator light	Green LED (lights up when light is stable, lights up when no light is stable) Receiver equipment
Power indicator	Green LED (lit when powered) located on the projector
Environmental resistance: Protective structure	IP65(IEC)
Environmental resistance: Ambient temperature	-25℃~+55℃ (no condensation or icing) Storage: -30℃~+70℃
Environmental resistance: operating environment humidity	35%RH~85%RH, Storage: 35%RH~85%RH
Environmental performance: ambient lighting	Incandescent lamp: 3,000ℓx or less illumination on the light receiving surface; Sunlight: 10,000ℓx or less illumination on the light receiving surface
Environmental resistance: Withstand voltage	AC1,000V 1 minute (between all power connection terminals and the housing)
Environmental resistance: Insulation resistance	Between all power connection terminals and the housing, more than 20MΩ, based on a DC250V high resistance meter
Environmental resistance: Vibration resistance	Frequency 10Hz~500Hz · Double amplitude 1.5mm (MAX.10G) X, Y and Z directions 2 hours each (non-powered state)
Environmental resistance: impact resistance	Acceleration 500m/s² (about 50G) 3 times each in X, Y and Z directions (non-powered state)
Light projector	Red LED (modulated) Light emission wavelength: 626nm
Installation torque	0.5N·m or less
Material	Shell: PC+ABS Lens: PC
Cable: Type	0.1mm² rubber cable (emitter: 2 cores, receiver: 3 cores)
Cable: Standard length	2m(Note): When the product model is C05, the cable length is 0.5m.
Cable: Cable extension	Cables with a diameter of 0.3 mm² or more can be extended to a total length of 100 m
Weight: Body weight	Emitter: Approx. 25g Receiver: Approx. 25g
Weight: Package weight	About 50g